EHEIM – Classic 2211 External Filter with Bio Media – 40 Gallons Online

Filter Maintenance: Maintaining your filter is best done while you are changing your filter media. Rinse the filter canister and the two lattice screens with water and remove any dirt residues. Before the pump head is replaced, check the rubber o-ring. If it is worn, it should be replaced immediately. If the o-ring is not worn, it should be moistened so that the pump head can be pressed down without difficulty. The water inlet of the canister should be cleaned with a cleaning brush. At longer intervals (every six months or when build up of debris is seen), the hose system should be cleaned. The pump of your EHEIM filter also requires some regular maintenance. Remove all parts carefully and clean all parts with a mild dishwashing soap and rinse thoroughly with water making sure that no soap remains. Clean the cooling pipe and the impeller chamber with a brush. Replace all parts in reverse order of dissemble. For model 2213, while replacing the cooling pipe shaft, ensure that it is pushed in until it is flush and locked into place. IMPORTANT: if your pump is extremely dirty and the impeller and associated parts are hard to remove, soak the complete pump head in warm water and mild dishwashing soap overnight. You should never force the removal of these parts, as they are fragile.

Filter media fulfill various functions – mechanical, biological, adsorptive and chemical filtration. They remove dirt particles and suspended floating matter from your aquarium and ensure the biological conversion of toxic waste or the chemical alteration of the water. Ideal water conditions very much depend on the correct use of filter media.

EHEIM filter pads are used to separate the different filter media layers in standard filters.

EHEIM filter cartridges made of special foam materials provide a large filter surface. They can be changed in a few simple steps and after their “running in” time they not only function mechanically but also biologically. EHEIM active carbon cartridges are also excellent for adsorption.

EHFISYNTH filter pad for mechanically fine cleaning, especially for EHEIMprofessional external and thermo filters.

Media Maintenance: Your filter media needs to be cleaned every 3-6 months. You should change 1/3 to­ 2/3 of the EHFISUBSTRAT every 6-12 months. The EHFISYNTH pad should be changed with every cleaning and the EHFIFIX pad should be changed when it becomes flattened or every year.

Filter Maintenance: Maintaining your filter is best done while you are changing your filter media. Rinse the filter canister and the two lattice screens with water and remove any dirt residues. Before the pump head is replaced, check the rubber o-ring. If it is worn, it should be replaced immediately. If the o-ring is not worn, it should be moistened so that the pump head can be pressed down without difficulty. The water inlet of the canister should be cleaned with a cleaning brush. At longer intervals (every six months or when build up of debris is seen), the hose system should be cleaned. The pump of your EHEIM filter also requires some regular maintenance. Remove all parts carefully and clean all parts with a mild dishwashing soap and rinse thoroughly with water making sure that no soap remains. Clean the cooling pipe and the impeller chamber with a brush. Replace all parts in reverse order of dissemble. For model 2213, while replacing the cooling pipe shaft, ensure that it is pushed in until it is flush and locked into place. IMPORTANT: if your pump is extremely dirty and the impeller and associated parts are hard to remove, soak the complete pump head in warm water and mild dishwashing soap overnight. You should never force the removal of these parts, as they are fragile.

Filter media fulfill various functions – mechanical, biological, adsorptive and chemical filtration. They remove dirt particles and suspended floating matter from your aquarium and ensure the biological conversion of toxic waste or the chemical alteration of the water. Ideal water conditions very much depend on the correct use of filter media.

EHEIM filter pads are used to separate the different filter media layers in standard filters.

EHEIM filter cartridges made of special foam materials provide a large filter surface. They can be changed in a few simple steps and after their “running in” time they not only function mechanically but also biologically. EHEIM active carbon cartridges are also excellent for adsorption.

EHFISYNTH filter pad for mechanically fine cleaning, especially for EHEIMprofessional external and thermo filters.

Media Maintenance: Your filter media needs to be cleaned every 3-6 months. You should change 1/3 to­ 2/3 of the EHFISUBSTRAT every 6-12 months. The EHFISYNTH pad should be changed with every cleaning and the EHFIFIX pad should be changed when it becomes flattened or every year.